|
Post by koonce on Aug 3, 2013 20:55:15 GMT -6
Well after loosing some top end speed I decided I needed to solve the problem. Leak down test on the motor checked out good. So we went to the floor to check for waterlogged foam. I was expecting more weight than what we found but it should help some. Prob 40ish lbs of foam and another 30+ lbs of swamp muck under the foam. Have a few dents to pound out of the floor and hoping that will be the trick. Removing hydro turf and rivets Floor and foam removed Now gotta pound out some dents and get the floor back in
|
|
|
Post by koonce on Aug 3, 2013 21:00:24 GMT -6
Got er back to the shop today
|
|
|
Post by koonce on Aug 3, 2013 21:01:52 GMT -6
Got the back panels in first And got it all back together now just gotta get the turf back in
|
|
|
Post by teamoutlaw on Aug 7, 2013 7:31:59 GMT -6
how long that take ya
|
|
|
Post by koonce on Aug 7, 2013 18:15:31 GMT -6
Meh, in total two guys under 5 hours. An air riveter is a must. Couldn't imagine putting them all back in by hand.
|
|
dkmf
Full Member
Posts: 235
|
Post by dkmf on Aug 9, 2013 17:05:00 GMT -6
That's a nice rear in the first pic!
|
|
|
Post by koonce on Aug 22, 2013 10:03:21 GMT -6
Plan to get the turf back in the boat and some new blind doors made this weekend. Hope the weather allows. Gotta get er raffiad up also
|
|
|
Post by teamoutlaw on Aug 22, 2013 10:38:55 GMT -6
it's raining it's rear off right now down here.
|
|
|
Post by koonce on Aug 22, 2013 11:44:19 GMT -6
We need the rain, its been pretty dry around these parts since those last storms smashed us well over a month ago.
|
|
|
Post by jtg1551 on Aug 22, 2013 12:12:31 GMT -6
it's raining it's rear off right now down here. I was at work on the dam roof. It started pouring, then I got the call to stay up there and fasten doin all the loose metal. So I was drenched by the time I got down
|
|
dkmf
Full Member
Posts: 235
|
Post by dkmf on Aug 24, 2013 12:10:28 GMT -6
Gotta love that!!
|
|